Recirculation control, Automatic temperature control (atc), Automatic operation – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 424

Advertising
background image

Recirculation Control

When outside air contains smoke, odors, or

high humidity, or if rapid cooling is desired,

you may wish to recirculate interior air by

pressing the RECIRCULATION control button

on the touchscreen or faceplate. Recirculation mode

should only be used temporarily. The recirculation LED

button on the faceplate will illuminate when either

button is selected. Push either button a second time to

turn off the Recirculation mode LED and allow outside

air into the vehicle.
NOTE:

In cold weather, use of Recirculation mode may

lead to excessive window fogging. The recirculation

feature may be unavailable (button on the touchscreen

greyed out) if conditions exist that could create fogging

on the inside of the windshield. On systems with Manual

Climate Controls, the recirculation mode is not allowed

in Defrost mode to improve window clearing operation.

Recirculation will be disabled automatically if this mode

is selected. Attempting to use Recirculation while in this

mode will cause the LED in the control button on the

faceplate to blink and then turn off.

Automatic Temperature Control (ATC)

Automatic Operation

1. Push the AUTO button on the faceplate or press the

“AUTO” button on the touchscreen.

2. Next, adjust the temperature you would like the

system to maintain by adjusting the driver and pas-

senger temperature buttons on the faceplate or but-

tons on the touchscreen. Once the desired temperature

is displayed, the system will achieve and automati-

cally maintain that comfort level.

422 UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising
This manual is related to the following products: