Rain sensing wipers — if equipped – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 185

Advertising
background image

NOTE:

The mist feature does not activate the washer

pump; therefore, no washer fluid will be sprayed on the

windshield. The wash function must be used in order to

spray the windshield with washer fluid.

Rain Sensing Wipers — If Equipped

This feature senses moisture on the windshield and

automatically activates the wipers for the driver. The

feature is especially useful for road splash or overspray

from the windshield washers of the vehicle ahead. Rotate

the end of the multifunction lever to one of five settings

to activate this feature.
NOTE:

If your vehicle is equipped with a touchscreen,

this feature can be programmed through the Uconnect®

system. Refer to “Uconnect® Settings” in “Understand-

ing Your Instrument Panel” for further information.

If your vehicle is not equipped with a touchscreen, this

feature can be programmed through the Electronic Ve-

hicle Information Center (EVIC) or Driver Information

Display (DID). Refer to “Electronic Vehicle Information

Center (EVIC)” or “Driver Information Display (DID)” in

“Understanding Your Instrument Panel” for further in-

formation.
The sensitivity of the system can be adjusted with the

multifunction lever. Wiper delay position 1 is the least

sensitive, and wiper delay position 5 is the most sensi-

tive. Setting 3 should be used for normal rain conditions.

Settings 1 and 2 can be used if the driver desires less

wiper sensitivity. Setting 4 and 5 can be used if the driver

desires more sensitivity. Place the wiper switch in the

OFF position when not using the system.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183

Advertising
This manual is related to the following products: