Reinstalling the jack and tools (1500 series) – Ram Trucks 2015 3500 - Owner Manual User Manual
Page 716
Advertising
![background image](/manuals/709190/716/background.png)
mechanism slip, or click three or four times. It cannot
be overtightened. Push against the tire several times to
ensure it is firmly in place.
NOTE:
The winch mechanism is designed for use with
the jack extension tube only. Use of an air wrench or other
power tools is not recommended and can damage the
winch.
Reinstalling The Jack And Tools (1500 Series)
1. Tighten the jack all the way down by turning the jack
turn-screw counterclockwise until the jack is snug.
2. Position the jack and tool bag. Make sure the lug
wrench is under the jack near the jack turn-screw.
Rotating The Wheel Wrench Handle
714 WHAT TO DO IN EMERGENCIES
Advertising
This manual is related to the following products: