Using the panic alarm – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 29

Advertising
background image

(EVIC)/Settings (Customer-Programmable Features)”

in “Understanding Your Instrument Panel” for further

information.

• For vehicles equipped with a touchscreen radio, refer

to “Uconnect® Settings” in “Understanding Your In-

strument Panel” for further information.

NOTE:

Pushing the LOCK button on the RKE transmitter

while you are in the vehicle will activate the Vehicle

Security Alarm System. Opening a door with the Vehicle

Security Alarm System activated will cause the alarm to

sound. Push the UNLOCK button to deactivate the

Vehicle Security Alarm System.

Using The Panic Alarm

To turn the Panic Alarm feature ON or OFF, push and

hold the PANIC button on the RKE transmitter for at

least one second and release. When the Panic Alarm is on,

the headlights will turn on, the park lights will flash, the

horn will pulse on and off, and the interior lights will

turn on.
The Panic Alarm will stay on for three minutes unless

you turn it off by either pushing the PANIC button a

second time or drive the vehicle at a speed of 5 mph

(8 km/h) or greater.
NOTE:

• The interior lights will turn off if you turn the ignition

switch to the ACC or ON/RUN position while the

Panic Alarm is activated. However, the exterior lights

and horn will remain on.

• You may need to be less than 35 ft (11 m) from the

vehicle when using the RKE transmitter to turn off the

Panic Alarm due to the radio frequency noises emitted

by the system.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27

Advertising
This manual is related to the following products: