Service the parksense® park assist system – Ram Trucks 2015 3500 - Owner Manual User Manual
Page 210
![background image](/manuals/709190/210/background.png)
(EVIC) or Driver Information Display (DID)” in “Under-
standing Your Instrument Panel” for further information.
When the shift lever is moved to REVERSE and the Front
or Rear system is disabled, the EVIC/DID will display
the ЉFRONT PARKSENSE OFFЉ or ЉREAR PARKSENSE
OFFЉ message for five seconds, followed by a car graphic
with ЉOFFЉ in the corresponding side. This car graphic
will be displayed for as long as the vehicle is in RE-
VERSE.
NOTE:
Arc alerts from the enabled ParkSense® system,
will interrupt the five second messages, and the EVIC/
DID will display the car graphic with the corresponding
arcs and ЉOFFЉ message.
The Front or Rear ParkSense® switch LED will be ON
when Front or Rear ParkSense® is disabled or requires
service. The Front or Rear ParkSense® switch LED will
be OFF when the Front or Rear system is enabled. If the
Front or Rear ParkSense® switch is pushed, and the
system requires service, the Front or Rear ParkSense®
switch LED will blink momentarily, and then the LED
will be ON.
Service The ParkSense® Park Assist System
During vehicle start up, when the ParkSense® System
has detected a faulted condition, the instrument cluster
will actuate a single chime, once per ignition cycle, and it
will display the ЉPARKSENSE UNAVAILABLE WIPE
REAR SENSORSЉ, ЉPARKSENSE UNAVAILABLE WIPE
FRONT SENSORSЉ, or the ЉPARKSENSE UNAVAIL-
ABLE SERVICE REQUIREDЉ message for five seconds.
When the shift lever/gear selector is moved to Reverse
and the system has detected a faulted condition, the
Electronic Vehicle Information Center (EVIC) or Driver
Information Display (DID) will display a ЉPARKSENSE
UNAVAILABLE WIPE REAR SENSORSЉ, ЉPARKSENSE
UNAVAILABLE
WIPE
FRONT
SENSORSЉ
or
Љ
PARKSENSE UNAVAILABLE SERVICE REQUIREDЉ
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE