Pattern selector dial, Stitch length dial, Stitch width dial – Sears 385.4052LX200 User Manual
Page 36: Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pattern Selector Dial
Raise the needle and presser foot. Turn the pateern selector
dial to set the setting mark at the symbol corresponding to the
desired pattern,
® Setting mark
Stitch Length Dial
Turn the stitch length dial to set the setting mark at the desired
stitch length.
The higher the number, the longer the stitch length
© Setting mark
• “
^^3
” is the recommended setting for buttonhole stitching.
• Adjust the dial in the 0.5--4 range when you sew the zigzag
stitch.
• Set the dial at "S.S.” to sew the stretch stitch pattern sewing.
• if the stretch stitch pattern is not uneven, turn the stitch
length dial in the direction of to compress it, or to
expand it.
Stitch width dial
Turn the stitch width dial to set the setting mark at the
desired stitch width.
The higher the number, the wider the stitch width
® Setting mark
Note:
Raise the needle above the fabric, when you turn the stitch
width dial.