Section 6. care of your machine, Dismantling and assembling hook race unit note, To dismantle hook race unit – Sears 385.4052LX200 User Manual
Page 72: To assemble hook race unit, Cleaning the feed dog, Note, Dismantling and assembling hook race unit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 6. CARE OF YOUR MACHINE
Dismantling and Assembling
Hook Race Unit
Note:
Turn off the power switch and/or unplug the machine.
To dismantle hook race unit:
Raise the needle to its highest position and open the hook cover.
Open the hinged latch of bobbin case and take it out of the
machine.
Open the hook race ring holders and remove the hook race ring.
Remove the hook.
* Clean the hook race with a brush and a soft dry cloth.
® Bobbin case
(D
Hook race ring holder
C3) Hook race ring
® Hook
® Hook race
To assemble hook race unit:
Hold the hook by the center pin and fit it carefully back into the
hook race, forming a perfect circle with the shuttle driver.
Attach the hook race ring making sure the bottom pin fits into the
notch.
Lock the hook race ring by turning the holders back into position.
Insert the bobbin case.
® Pin
Cl) Notch
Cleaning the Feed Dog
Note:
Turn off the power switch and/or unplug the machinebefore
cleaning the feed dog.
Remove the needle and the presser foot.
Remove the needle plate set screw and remove the needle plate.
With a brush, clean out dust and lint dogging the feed dog teeth.
Reset the needle plate.
64