Oiling the machine – Sears 385.4052LX200 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Oiling the Machine
Oil behind the face cover
Unplug the machine.
Take the face plate off the sewing machine by removing
the setscrew.
Open the face cover and oil the three points, as shown, at
least once a year.
One or two drops of oil is sufficient. Remove excess oil,
otherwise it may stain the fabric. In case the machine has not
been used for a long time period, oil it before sewing.
Use quality sewing machine oil.
Oil the shuttle area
Open the shuttle cover by pulling down the embossed part on
the left side of the cover.
Oil the point as indicated in the illustration.
_y
66
Advertising