Twin needle sewing – SINGER 2112 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Twin Needle Sewing

Twin needle sewing produces two parallel lines of closely-spaced, decorative stitching.

^ With machine turned off, insert twin needle into needle clamp and thread machine as

for single-needle sewing and through right needle eye (1).

^ Attach extra spool pin with felt washer (2), to bobbin winder spindle (3); place second

spool of thread on it; and, again, thread machine as usual except omit thread guide (4)

immediately above needle. Pass second thread through eye of left hand needle.

* Set stitch width control to desired width between straight stitch and the twin needle

mark (5).

CAUTION: DO NOT use a stitch width greater than that indicated by twin needle mark
on stitch width control or needle breakage will result. Rotate handwheel slowly by hand to
visually check for adequate needle clearance before pressing foot controller.

This machine MAY NOT be supplied with the twin needle or extra spool pin and felt
washer. If not, these accessories are available from an approved dealer.


This manual is related to the following products: