SINGER 626E6 Touch & Sew User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
W'5v'
Remove
spool
holder
from spindle by sliding
it to the left.
rti
Slip spool of thread onto
spindle.
To hold small spools —
Turn small end of spool
holder to the right and
slide onto spindle. Press
spool
holder
firmly
against spool.
To hold large spools —
Turn wide end of spool
holder to the right and
slide onto spindle. Press
spool
holder
firmly
against spool.
1. Turn hand wheel to raise take-up lever to its highest
position.
2. Raise the presser foot.
3. Lead thread through all threading points as shown.
4. Thread needle from front to back, drawing about four
inches of thread through eye of needle.
Advertising
This manual is related to the following products: