Accessories – SINGER 626E6 Touch & Sew User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

'accessories

The following accessories come with your machine.
And to increase the versatility of your sewing ma­
chine still further, a number of additional accessories
such as a Special Purpose Presser Foot, a Binder Foot

and a Ruffler are available at your local SINGER
CENTER. (Some of these accessories are described
at the end of this instruction book.)

BOBBINS

® One Transparent Drop-in Bobbin in place in your

machine.

® Two extra Transparent Drop-in Bobbins,

NEEDLES

® One Needle, Catalog 2020 (15x1) Size 14, in

place in your machine.

® Three extra Needles of the same size.

To Change the Needle

1. Raise needle bar to highest position by turning

hand wheel toward you.

2. Loosen the needle-clamp screw and remove the

needle.

3. Insert new needle in clamp, with the flat side

of the needle to the back and the long groove
toward you; push it up as far as it will go.

4. Tighten needle-clamp screw.

This machiiie oses needles

Catalog 2020 (15X1)

Sizes 9p 11, 14, 16 and 18,

® One Vertical Spool Pin

The Vertical Spool Pin is used for two-needle stitch­
ing (see page 26 for detailed instructions).

Vertical Spool Pin

\n

13

Advertising
This manual is related to the following products: