To remove the bobbin case – SINGER 626E6 Touch & Sew User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Remove the Bobbin Case
1. Open slide plate and remove throat plate (see page
15 for instructions).
2. Turn hand wheel to raise take-up lever to its high
est point.
3. Remove bobbin. Keep bobbin push-button in sew
ing position.
4. To unlock bobbin case, lift position bracket (at
right of case) and slide to right.
5. To remove bobbin case, hold latch, twist case to
right, and lift it out.
1. Turn hand wheel to raise take-up lever to its high
est point. Keep bobbin push-button in sewing posi
tion.
2. Hold bobbin case by latch and, with latch to right
of needle, slip case in position so that the groove
engages hook channel.
3. Twist bobbin case to left until latch is in center.
4. Push position bracket to left until it snaps down,
locking bobbin case in place.
5. Replace bobbin and snap latch down.
6. Replace throat plate and close slide plate.
c,v>, >
: l i Lift and Slide Position Bracket
A A' !i
r
Remove Bobbin Case
Soap Laidi Down
Push Position
Bracket to Left
53