To release the chain from the machine – SINGER 626E6 Touch & Sew User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pattern Selector: Straight Stitch (-----------------------)
Stitch Width Selector: 1
Needle Position: C
Stitch Length: 8 to 12 only
Presser Foot: Straight Stitch or General Purpose
1, Be sure that throat plate is in REGULAR position,
then place needle in very edge of fabric and lower
presser foot.
2. Start the machine and stitch to end of seam. Con
tinue stitching beyond edge of fabric, making a
chain from one to two inches long,
3, Cut chain between fabric and presser foot.
4. After chaining off, start a new line of stitching by
raising the presser foot slightly and positioning
the fabric in front of needle. Lower presser foot
and stitch to end of seam,
TO RELEASE THE CHAIN FROM THE MACHINE
When you finish chainstitching, the chain can be
easily removed from the machine,
1. Raise presser foot.
2, Hold end of chain with your left hand.
3, Turn hand wheel slowly toward you with your
right hand until needle is all the way down in the
needle hole,
4. Then turn hand wheel slowly away from you,
pulling gently on chain, which will unravel as
needle raises.
¿ A / - ' ' A
Stitch Starting Point after Chaining Off
7
To Release Chain
31