Principa! parís, What they are called – SINGER 626E6 Touch & Sew User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

principa! parís—

what they are called

1. Needle Position Selector allows for placement

of both straight and zig-zag stitching in either
left, center, or right needle position.

2. Stitch Width Selector allows for variety of stitch

widths, as well as straight stitching.

3. Pattern Selector with illustrated settings allows

for easy selection of seven decorative stitches,

and straight stitching.

4. Take-up Lever.

5. Pressure Regulating Dial has eight numbered

settings (from low for light pressure to high for
heavy) and special setting for darning.

6. Threading Chart on swing-open face plate is

convenient, easy to read.

7. Thread Cutler built into presser bar is designed

for safety, convenience.

8. Presser Foot holds fabric against feed dog.

(Presser Foot Lifter at back of machine, not

shown, allows you to raise and lower Presser

Foot.)

9. Elevator-Type Throat Plate is easily placed in

any of three sewing positions: REGULAR,
FINE, DARN; and UNLOCK position for easy
removal.

10. Transparent Bobbin shows thread supply. Two

halves can be unscrewed to remove unwanted
thread.

11. Bobbin Latch flips up at a touch of your finger.

12. Bobbin Push-Button allows you to switch from

sewing to bobbin winding without removing

bobbin.

13. Slide Plate opens easily, lets you see bobbin.

Automatically releases bobbin push-button

from winding to sewing position when closed.

14. Needle-Thread Tension Dial allows for exact

settings.

15. Built-in Sewing Light pours light on sewing

area.

16. Throat Plate Position Lever.

17. Stitch Length Selector allows for variety of

stitch lengths including FINE for zig-zag satin
stitching.

18. Hand Wheel controls take-up lever. Always turn

it toward you.

19. Power and Light Switch turns on machine and

sewing light simultaneously.

20. Friction-Free Spool Holder. Horizontal pin

holds spools of various sizes; holders let thread
unwind without tug or drag. The spool does not
turn.

21. Electrical Connections and Foot Controller are

designed for your convenience and safety.

Advertising
This manual is related to the following products: