SINGER 626E6 Touch & Sew User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
straight Stitch Presser Foot
PRESSER FEET
® General Purpose Presser Foot on your machine.
Use the General Purpose Presser Foot with the
Genera! Purpose Throat Plate
for all utility sew
ing. These general purpose fittings must be used
when alternating between straight and zig-zag
stitching. (For discussion of throat plates, see page
15.)
® Straight Stitch Presser Foot,
Use the Straight Stitch Presser Foot with the
Straight Stitch Throat Plate,
and pattern selector
set for straight stitching in center needle position,
when your fabric or sewing procedure requires
close control. This narrow, hinged foot rides over
pins and allows you to control the fabric easily
when stitching in a curve or close to the fabric
edge. The narrow slot prevents fabric from rising
with the needle. Use these fittings for:
® Precision stitching of curved and scalloped
edges, top stitching, edge stitching, etc.
® Stitching on delicate or spongy fabrics, synthet
ics, and knits, particularly tricot.
To Change Any Presser Foot
1, Raise presser foot.
2, Loosen presser foot screw. (You do not need to
remove the screw. )
3, Remove presser foot.
4, Hook new presser foot around presser bar.
5, Tighten presser foot screw.
14