To ewd the stitch i – SINGER 626E6 Touch & Sew User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO EWD THE STITCH I
THE FABRIC
Occasionally you may need to end your stitching in
the fabric. Basted hems and temporary tucks, for ex
ample, as well as partially stitched-down pleats can
be completed in this way:
1. Stop stitching at desired point, with take-up lever
in its highest position.
2. Raise presser foot.
3. With your finger, pull the thread through the
take-up lever, forming a loop between the take-up
lever and chainstitch thread guide.
4. Pass scissors under presser foot so as to draw the
loop down to the left of the foot.
5. Hold the loop and cut the thread close to the end
of the stitching.
6. Remove fabric from machine by pulling it
straight back, away from you. This will cause the
thread end to pull through the fabric to the un
derside and form a temporary lock.
7. If you wish to secure this temporary lock, fold the
thread end back over the chain and fasten with
hand stitching.