SINGER 626E6 Touch & Sew User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CB
2
3
I
c®
D®
With Needle Position Selector at L, place Stitch Width
Selector on setting desired for side stitching of button
hole. Place work under needle, aligning center mark
ing of buttonhole with slot in the presser foot.
Side Stitching: Position needle in fabric at point A.
Lower foot and stitch to end of marking. Leave
needle in fabric at point B. Raise foot and pivot work
on needle. Lower foot. Take one stitch without
changing width setting, bringing work to point
C.
Bar Tack:
Adjust Stitch Width Selector for bar tacks
and take at least six stitches. Stop at point
D.
;
' 2
3
I
;2\
Side Stitching:
Readjust Stitch Width Selector for
side stitching. Complete work to point E. Leave
needle in fabric.
22V
■
5
,Ul.J .
■2i,v
Final Bar Tack:
Adjust Stitch Width Selector for bar
tacks, and take at least six stitches
in reverse,
ending
at point
F.
's&:
:TV
vv
;
1 n
1 , T .. T . t
'1
c
VK'W
.T
lv
;
Fastening Stitch;
To secure stitching, move Selector
to 1 and take three stitches. Remove work, draw
threads to underside, fasten and trim. Cut opening
for button with sharp scissors.
44