SINGER 626E6 Touch & Sew User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THROAT PLATES
® General Purpose Throat Plate in place on your
machine. (For use with General Purpose Presser
Foot.)
Two additional Throat Plates;
® Straight Stitch Throat Plate. (For use with Straight
Stitch Presser Foot.)
* Chainstitch Throat Plate. (This throat plate is one
of three chainstitch fittings that must be used to
gether and is discussed under the heading, “Chain
stitch Fittings” on page 16.)
General Purpose Throat Plate
Straight Stitch Throat Plate
To
Interchange
Straight Stitch and General Pur
pose Throat Plates
(For instructions on attaching and removing Chain
stitch Throat Plate, see “Chainstitching” beginning
on page 29.)
(Note: Remove bobbin if it contains thread.)
1. Raise presser foot. (You do not need to remove
the presser foot.)
2. Turn hand wheel to bring needle above throat
plate.
3. Move throat plate lever to UNLOCK position.
4. Remove throat plate by sliding it out.
5. Insert new throat plate by sliding it into place
between the slots in the pins.
6. Move throat plate lever toward right to lock
throat plate in place.
15