SINGER 626E6 Touch & Sew - Manual (Page 56)

area
You will find this easier to do if you remove the
top cover first, as described below.
of O i l in the hole behind throat plate
Oil and lobricate top of machine as shown on next
page.
® After oiling, always sew a few lines of stitching on
a scrap of material to remove excess oil.
® SINGER’' Lubricant, as well as Oil, is available
for purchase at your SINGER CENTER.
Apply a Drop of Oil to Each Spot Shown
To Remove and Replace Top Cover
3. Replace cover by positioning it on top of the
arm with a slight overhang on the left side;
slide cover to the right until it locks in place.
4. Replace and tighten screw A.
54