If the machine is to be stored – SINGER 626E6 Touch & Sew User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1. Disconnect plug from electrical outlet.
2. Tilt machine back and loosen screws from the four
corners of the machine bed to remove bottom
cover.
3. Apply SINGER Oil and SINGER Lubricant as
shown.
4. Replace bottom cover.
IF THE MACHINE IS TO BE STORED
1. Disconnect electrical controller from machine
and wall outlet.
2. Clean all exposed parts and area behind
plate.
3. Swab all exposed metal parts and parts behind
face plate with lint brush saturated with i
Oil, to protect against rust.
55
Advertising
This manual is related to the following products: