SINGER 626E6 Touch & Sew User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PERFORMANCE CHECK LIST
Remember to
® Be sure Power and Light Switch is on
® Remove all thread from bobbin before rewinding
® Fill empty bobbin
. . . in center needle position with Stitch Width Selector on 1
. . . before fitting accessories to machine
. . . before inserting additional needle for two-needle work
® Close slide plate after winding bobbin
® Position needle out of fabric when making stitch width and stitch pattern adjustments
® Clear your machine of lint and fluff periodically and apply oil
® Use your Instruction Book. It was written to explain the most efficient way to operate
and use this remarkable new machine
If threads breaks
® Is the machine properly threaded?
• Is the thread spool secured by the spool holder?
• Is the spool holder positioned correctly?
® Is a Catalog 2020 (15X1) needle correctly inserted and securely tightened in the
needle clamp?
® Is the needle straight and sharp?
o Is the thread suitable for the size of the needle?
• Is the thread free of slubs and knots?
® Is the thread unwinding freely from the spool?
• Is the needle-thread tension too tight?
® Is the presser foot raised for bobbin winding?
® Is a moderate speed used for bobbin winding?
e Are the bobbin halves evenly and securely screwed together?
• Is the bobbin properly seated and secured by the latch in the bobbin case?
® Is the bobbin-case area free of lint and loose thread ends?
® Are the thread guides and tension discs also lint-free?
If you have any questions, please write to:
Department of Sewing Education
The Singer Company
30 Rockefeller Plaza, New York, N. Y. 10020
57