SINGER 771 Touch & Sew II User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
straight stitch foot Is used with the straight
stitch needle plate when your fabric or sewing
procedure requires close control Use for:
• Precision straight stitching of curved and
scalloped edges, top stitching, edge stitch
ing. etc.
• Straight stitching delicate or spongy fabrics.
Special purpose foot is used with the general
purpose needle plate for all kinds of decora
tive zig-zag stitching. The raised center sec
tion of the foot allows closely spaced zig-zag
stitching to feed freely while the toe holds
fabric firmly for straight line feeding. Use for:
• Ornamental stitching, bar-tack buttonholes.
Flexi-Stitch pattern stitching, applique, satin
stitching,
Presser Feet for Special Sewing Needs
Zipper foot is used to place stitching close to
a raised edge. Thus, it is useful for corded
seams (page 48) as well as zipper insertion
(page 47). It can be fitted to the presser foot
shank for use on either the right or left side of
the needle.
Sutton foot holds any two-hole or four-hole
button securely for stitching. The groove in
the foot can be used to hold a needle, over
which a thread shank can be formed.
Buttonhole foot. This snap-on transparent
foot is used to make two-step, round-end but
tonholes in fabrics of light to medium weight.
The guidelines on the sole plate simplify but
tonhole placement and make it easy to gauge
buttonhole length.
Overedge
foot,
used
with
the overedge
stretch pattern (see page 54) enables you to
produce flexible overedge seams and edge
finishes. It is particularly useful in construc
tion of garments made of knit, stretch, and
elastic fabric.
Even Feed foot improves the feeding of
fabrics that tend to stick, stretch, or slip while
being sewn. The foot feeds top and bottom
fabric layers together so that seams start
even, feed evenly, and end even.
Straight Stitch Foot
Button Foot