Straight stitching, Setting the iviachine, Choosing accessories – SINGER 771 Touch & Sew II User Manual

Page 20: Preparation, Starting to sew

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

3. STRAIGHT STITCHING

1

:... 4. -

; A

Dials Set for Straight Stitching

Straight Stitch Foot and Needle Plate

Pattern: Straight Stitch

Needie Position: A

Stitch Width: A
Stitch Controi; To suit fabric
Straight Stitch Needle Plate or
General Purpose Needle Plate
Straight Stitch Foot or
General Purpose Foot

preparation

Before you set the dials for straight stitching,

turn the handwheel toward you untiltheneedle

is above the needle plate.

SETTING THE IVIACHINE

!

1. Set pattern dial selector at .

2. Move needle position dial to

A .

3. Set stitch width dial on A .

4. Set stitch control for desired stitch length.

For regular straight stitching, turn dial to
a numbered setting; for straight stretch
stitching, turn dial to ^ setting.

CHOOSING ACCESSORIES

Best results will be obtained if you use the

straight stitch foot and needle plate. However,
the general purpose foot and needle plate

may also be used.

starting to sew

* Place needle and bobbin threads under pres-

ser foot and draw to back of machine.

• Position the needle in the fabric where de­

sired for stitching start.

♦ Lower the presser foot and start the machine.

To sew perfectly on a wide variety of fabrics
adjust stitch length, pressure and thread ten­
sion as instructed on the following pages.

For information on straight stretch stitching, turn

to page 52.

18

Advertising
This manual is related to the following products: