Attachmg the zipper foot, S. sewing the professional way, Construction details – SINGER 771 Touch & Sew II User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S. SEWING THE PROFESSIONAL WAY
construction details
ZIPPERS
At the notions counter in your Singer store,
you will find many different kinds of zippers,
one of which will be just right for whatever you
wish to sew. How the zipper is inserted will
depend on the type of garment and the loca
tion of the zipper. The zipper package will con
tain easy-to-foilow instructions. And, if you use
the zipper foot, you will find it easy to form an
even line of stitching close to the zipper.
i
Pattern: Straight Stitch ^
Stitch Width:
A
Needle Position: A
Stitch Control: 10 to 15 (1.5 to 2,5mm)
General Purpose or Straight Stitch Needle Plate
Zipper Foot
Attaching the Zipper Foot
The zipper foot snaps onto the presser foot
shank in the same manner as Instructed on
page 10.
When the zipper is to the right of the needle:
• Place the zipper foot under the presser foot
shank and lower the presser bar to allow the
shank to fit over the pin on the right side of
the zipper foot, so that the needle will enter
the right notch in the foot. Press down on
presser foot screw until foot snaps into
place.
When the zipper is to the left of the needle:
• Place the zipper foot under the presser foot
shank and lower the presser bar to allow the
shank to fit over the pin on the left side of
the zipper foot, so that the needle will enter
the left notch in the foot. Press down on
presser foot screw until foot snaps into
place.
Attachmg the Zipper Foot
Zipper
Foot to
Bight of Needle
Right Side
of Pin
Zipper Foot to
Left of Needle
47