SINGER 771 Touch & Sew II - Manual (Page 16)

Wmdirsg Steps
1. Press bobbin push button to the left to
engage it in winding position.
2. Wrap thread around pressar foot screw,
and hold end of thread firmly.
3. Start the machine.
* Run the machine at a moderate speed.
♦ Pull thread end away after a few coils
have been wound.
• Keep your eye on the bobbin as it fills. Do
not allow thread to wind beyond the out­
side FULL ring.
4. Close slide plate to release push button to
sewing position.
Turn to the next page for instructions on start­
ing to sew.
Winding Steps
Step 1
Do Not Allow
14