SINGER 771 Touch & Sew II User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WINDING THE BOBBIN
Push-button bobbin winding wiO make your
sewing go faster than ever before — whether
you are using a lot of one kind of thread or
small quantities of blfierent threads.
Bobbin
You will find a bobbin in place under the slide
plate of your machine. To open slide plate,
simply slide it gently toward you. If the bobbin
runs out of thread while you are sewing, you
can rewind it without removing it from the
machine-
preparation for Winding
l
4 R I
r 1 Ti-i
Preparation Steps
Make sure buttonhole dial is in OFF position.
1. Use genera! purpose, special purpose, or
straight stitch presser foot.
2. Raise presser foot to release tension on
thread, and raise the needie to its highest
position. (Make sure your needle is a size
11 or larger).
3. Set needle position and stitch width dials
at straight stitch setting indicated by
A symbols.
4. Open slide piate and make sure bobbin is
empty. For removal of bobbin and thread,
see page 16.
13