How to start sewing – SINGER 771 Touch & Sew II User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
how to start sewing
How you begin to sew after winding a bobbin
depends on whether your stitching is to start
at or away from the edge of the fabric.
TO START AT FABRIC EDGE
♦ Position needle in very edge of fabric by
pressing speed controller lightly or turning
the hand wheel
• Lower the presser foot and stitch. The con
tinuous thread, leading from the needle to
the bobbin, will 'lock” over the fabric edge.
TO START AWAY FROM FABRIC EDGE
• Puli thread back under presser foot and cut.
• Position needle in fabric where desired and
stitch.
NOTE: Should the bobbin run out of thread
after you have begun a line of stitching, re
move the fabric, rewind the bobbin, and follow
the two immediately preceding steps.
Starting at Fabric Edge
with a Continuous Thread
Starting Away from Fabric Edge
15