Preliminary steps – SINGER 518 Stylist User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

preliminary steps

CONNECTING THE MACHINE

Before plugging in your machine, be sure

that the voltage and number of cycles

indicated on the plate under the hand

wheel conform to your electrical power
supply.

Push the machine plug into the receptacle

at the right end of the machine bed. Then
connect the power-line plug to your
electrical outlet.

OPERATING MACHINE AND
CONTROLLER

To turn on both machine and sewing

light, press power and light switch to
ON position (red bar on switch will be

visible). To turn off machine and light,

press switch at red bar to OFF position.

CAUTION:

We

recommend

that

you

turn off the power and light switch before
changing needles, presser feet, and needle

plates and when leaving the machine

unattended. This eliminates the possibility
of starting the machine by accidentally

pushing the speed controller.

To run the machine, press the speed

controller. The harder you press, the

faster the machine will sew.

To stop the machine from sewing,

remove pressure from speed controller.

Speed Controller

10

Advertising
This manual is related to the following products:

518