Reinforcing end of seam – SINGER 518 Stylist User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
STRAIGHT STITCHING (Continued)
REINFORCING END OF SEAM
1.
Stitch to the fabric edge. Backstitch
i inch to reinforce the end of the
seam by pushing in the reverse-stitch
push button and then releasing.
2.
Turn hand wheel toward you to
bring needle to its highest point.
3. Raise presser foot and remove fabric
by drawing it to the back and left.
4.
Cut threads on thread cutter at rear
of presser bar.
24
Advertising
This manual is related to the following products: