Inserting the twin needle, Threading for twin-needle stitching – SINGER 518 Stylist User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Use SINGER twin needle. Style 2028 (size 14).
INSERTING THE TWIN NEEDLE
Before inserting the twin needle, make
sure you are using the general purpose
needle plate and that the needle position
dial is set at (left), and the stitch
width does not exceed the settings shown
on page 33.
To insert the twin needle, simply raise
needle to its highest point and loosen the
needle-clamp screw. Remove the single
needle and insert the twin needle in Its
place.
Tighten
needle-clamp
screw
securely.
threading for twin-needle stitching
For best results, use No. 50 mercerized cotton thread.
Thread the machine In the same manner as for single-needle stitching
except:
• Be sure that threads are separated by center tension disc as they pass
around tension assembly.
TWIN-NEEDLE STITCHING (Continued)
34