The needle thread, Threading the needle – SINGER 518 Stylist User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE NEEDLE THREAD
Lead thread
under right
guide, up, and
into tension
discs
Tension
Discs
Right
Guide
Lead thread over
spring and under
left guide
Left
Guide
Allow spring to return to its
normal up position and con
tinue threading the machine.
Threading the needle
1.
Turn hand wheel to raise take-up
lever to its highest position, and raise
presser foot to release the tension
discs.
2.
Lead thread through all points as
shown, making sure to:
• Snub thread as illustrated while guiding
thread into tension discs.
• Thread tension discs as illustrated.
• Thread take-up lever from back to front,
guiding thread down over top of lever
and then up Into eyelet.
•
•
Thread needle from front to back,
drawing about four inches of thread
through eye of needle.