Setting stitch length dial, Adjusting stitch balance, Adjusting pressure and choosing accessories – SINGER 518 Stylist User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FLEXI-STITCH
DISCS (Continued)
Red Bar
Stitch Length Dial
Incorrect
Correct
<<<<<<<<<<<W<<<<
Turn Dial to Right to Bring
Stitches Together
Incorrect
Correct
SETTING STITCH LENGTH DIAL
When you use a Flexi-Stitch disc pattern,
stitch length is controlled with a
single
setting
of the stitch length dial.
No
further adjustment should be made.
To set turn dial until red bar* is centered
under the arrowhead ▼ on the control
panel.
NOTE
: Stitching
cannot
be reversed
when the Flexi-Stitch disc dial
is on red Flexi-Stitch disc setting.
Use numerical setting for stitch length
adjustment
when using a Fiexi-Stitch
disc to produce a basic zig-zag stitch
pattern.
ADJUSTING STITCH BALANCE
You may need to adjust the Fiexi-Stitch
disc dial when using a Fiexi-Stitch disc
pattern in order to achieve the correct
pattern appearance. Before you move the
Fiexi-Stitch disc dial from its neutral
position
(red
bar
|
centered
under
arrowhead ▼), make a test sample. If
adjustment is required, stitch slowly and
move the dial as you sew.
• Turn the dial to the right to bring
stitches of the pattern together.
• Turn the dial to the left to separate
stitches of the pattern.
Turn Dial to Left to
Separate Stitches
Adjusting Stitch Balance
ADJUSTING PRESSURE AND
CHOOSING ACCESSORIES
Turn to page 19 under "Straight Stitching"
for instructions on adjusting pressure.
For information on choosing accessories
refer to detailed instructions for sewing
with Fiexi-Stitch disc patterns included in
the section called "Sewing the Pro
fessional Way", which starts on page 39.
32