ADLINK PXES-2590 - Manual (Page 64)

54 Monitoring/Control Functions
*Write to Default Threshold (command 0xC0)
Writes to Default Threshold.
Use the SMB write word to write this command:
With default thresholds as follows:
*Reset MCU (command 0xC2)
Resets the MCU.
Use the SMB write word to write this command
SMB Dir Offset Value Description
Write word > 0 SA Slave address
> 1 0xC0 Command code
> 2 0-255 N/A
> 3 0-255 N/A
Default Thresholds
Target Chassis Temperature 50
5V Alarm Threshold +-5%
3.3V Alarm Threshold +-5%
+12V Alarm Threshold +-5%
-12V Alarm Threshold +-5%
Fan Speed Alarm Threshold 800
Temperature Alarm Threshold 70
SMB Dir Offset Value Description
Write word > 0 SA Slave address
> 1 0xC2 Command code
> 2 0-255 N/A
> 3 0-255 N/A