ADLINK cPCI-6S10 - Manual (Page 28)

18 Specifications & Board Interfaces
NAND Flash Boot Mode Switch (SW14)
SW14 switch sets either Auto or Manual mode for boot from
NAND flash
Console Port Switch (SW21)
SW21 switch sets the console port to either BCM56150 or to IPMC.
Pin 1 Pin 2 Function
Off (no effect) Auto mode (default)
On On Manual mode: Select NAND 0
On Off Manual mode: Select NAND 1
Pin Function
1/2 On, 3/4 Off Console port to BCM56150 (Default)
1/2 Off, 3/4 On Console port to IPMC
ON
1 2
ON
1
2
3 4