ADLINK cPCI-6S10 User Manual
Page 77
Advertising
Getting Started
67
cPCI-6S10
To connect to the cPCI-6S10 IPMC debug serial port:
X
Set the SW21 the cPCI-6S10 to "Console port to IPMC":
1,2 Off; 3, 4 On; see “Console Port Switch (SW21)” on
page 18
X
Enter the following settings into the PuTTY Configuration
window:
Z
Speed: 9600
Z
Parity bit: None
Z
Flow Control: None
Z
All others settings default
X
Click "Open" to open the PuTTY command line interface
Advertising