ADLINK cPCI-6S10 - Manual (Page 33)

Hardware Platform Management 23
cPCI-6S10
Message Interfaces
X Access through Linux driver (on LMP locally): ipmitool
<command>
X RMCP remote client: ipmitool -I lan -H <hostname> [-p
<port>] [-U <username>] [-A <authtype>] <command>
X If bridged command is issued. An extra parameter should
be applied.
Z -t: select target slave address (0xB0 for slot1, 0xB2 for
slot2, etc, in ADLINK Chassis cPCIS-3300BLS).
Table 3-4: cPCIS-3300BLS Chassis Slots
Examples
Access from local LMP
ipmitool mc info
Get device Information from onboard payload with Linux IPMI
driver.
ipmitool raw 0x06 0x01
Get device id with IPMI raw command.
Access from RMCP remote client, bridged through the BMC
Slot No. IPMB Address (hex) Type
01 B0 CPU
02 B2 CPU
03 B4 CPU
04 B6 CPU
05 B8 SWH
06 BA CPU
07 BC CPU
08 BE CPU
09 C0 CPU
10 C4 SWH
11 C6 CPU
12 C8 CPU
13 CA CPU
14 CC CPU