ADLINK cPCI-6S10 - Manual (Page 76)

66 Getting Started
To connect to the cPCI-6S10 local management processor
(LMP) console:
X Set SW21 on the cPCI-6S10 to "Console port to BCM56150":
1, 2 On; 3, 4 Off; see “Console Port Switch (SW21)” on
page 18
X Enter the following settings into the PuTTY Configuration
window:
Z Speed: 115200
Z Parity bit: None
Z Flow Control: None
Z All others settings default
X Click "Open" to open the PuTTY command line interface