ADLINK cPCI-6S10 - Manual (Page 62)

52 Hardware Platform Management
Get FRU Inventory Area Info
Request Fields
Response Fields
Note: The command “Get FRU inventory area info” and “Read
FRU data” support customized design on this platform for PSU
FRU eeprom re-direction. However, “write FRU data” is not
acceptable for PSU.
Read FRU Data
ipmitool Ipmitool [parameters] raw 0x0A 0x10 0x00
Terminal
mode
[28 00 10 00]
Description Get FRU inventory area info
1 FRU Device ID. ( FFh = reserved)
0 – CMM
32h – PSU1
33h – PSU2
1
Completion code
2
FRU inventory area size in bytes, LS byte
3 FRU inventory area size in bytes, MS byte
4 [7:1] – reserved
[0] – 0b = device is accessed by bytes
1b = device is accessed by words
ipmitool Ipmitool [parameters] raw 0x0A 0x11 0x00 0x00 0x00 0x08
Terminal
mode
[28 00 11 00 00 00 08]
Description Read FRU data