ADLINK cPCI-6S10 - Manual (Page 34)

24 Hardware Platform Management
ipmitool -I lan -H 172.20.5.225 -U admin -P admin -t 0xB8 raw 0x06
0x01
Remote send raw command “Get device Id” to IPMC
(172.20.5.225) via RMCP protocol with username: admin,
password: admin, and let CMM to bridge it to CPCI-6S10
board plugged in slot 5 (slave address: 0xB8).
Response
X Complete: Completion code is 0x00 and will be skipped,
and only response data be printed.
X Error: More error message will be printed.
3.2.3 IPMItool Pre-defined Commands
X ipmitool raw: Send a raw command request.
X ipmitool mc: Print the management controller status and
global enabled options.
# ipmitool mc
MC Commands:
reset <warm|cold>
info
wdt
selftest
getenables
setenables <option=on|off> ...
recv_msg_intr Receive Message Queue Int.
event_msg_intr Event Message Buffer Full Int.
event_msg Event Message Buffer
system_event_log System Event Logging
oem0 OEM 0
oem1 OEM 1
oem2 OEM 2
X ipmitool fru: Print built-in FRU and scan SDR for FRU loca-
tors.
# ipmitool fru
FRU Device Description: Builtin FRU Device (ID 0)
Board Mfg Date: Tue Sep 16 20:00:00 2014
Board Mfg: ADLINK Technology