Get sensor threshold – ADLINK cPCI-6S10 User Manual
Page 48
38
Hardware Platform Management
Response Fields
Get Sensor Threshold
Example:
Request Fields
1
Completion code
ipmitool
ipmitool [parameters] sensor get <sensor id>
Terminal mode
[10 00 27 00]
Description
This command is used to get threshold. We can use
ipmitool command to get this info.
root@BCNMB-A:~# ipmitool -I lan -H 172.20.5.225
-U admin -P admin sensor get "56150_TEMP "
Locating sensor record...
Sensor ID : 56150_TEMP (0x8)
Entity ID : 160.96
Sensor Type (Analog) : Temperature
Sensor Reading : 67 (+/- 0) degrees C
Status : Upper Non-Critical
Lower Non-Recoverable : na
Lower Critical : na
Lower Non-Critical : na
Upper Non-Critical : 60.000
Upper Critical : 75.000
Upper Non-Recoverable : 88.000
Assertion Events : unc+
Deassertion Events : lnc- lnc+ lcr- lcr+
lnr- lnr+ unc- ucr- ucr+ unr- unr+
Assertions Enabled : unc+ ucr+ unr+
Deassertions Enabled : unc+ ucr+ unr+
1
Sensor number( FFh = reserved)