Get device id, 4 supported ipmitool commands get device id – ADLINK cPCI-6S10 User Manual
Page 35
Hardware Platform Management
25
cPCI-6S10
Board Product:
cPCI-6S10
Board Serial:
ADLINK-XXXX-XXXX
Board Part Number: cPCI-6S10
Product Manufacturer: ADLINK Technology
Product Name:
cPCI-6S10
Product Part Number: cPCI-6S10
Product Version:
A2
Product Serial:
ADLINK-XXXX-XXXX
Product Asset Tag:
N/A
X
ipmitool -I lan -H 172.20.5.225 -U admin -P admin -t 0xB4 sdr:
Print Sensor Data Repository entries and readings.
BMC_WatchDog
| no reading
| ns
POWER_GOOD
| 0 unspecified | cr
P1V | 1.01 Volts
| ok
P1V2 | 1.20 Volts
| ok
P1V5 | 1.50 Volts
| ok
P0V75 | 0.74 Volts
| ok
+3.3V | 3.32 Volts
| ok
+5.0V | 5.05 Volts
| ok
54685_TEMP | 47 degrees C
| ok
56150_TEMP | 67 degrees C
| nc
3.2.4 Supported IPMItool Commands
Get Device ID
Example
root@BDSP-A-0-0-1:~# ipmi mc info
Device ID : 18
Device Revision : 0
Firmware Revision : 1.2
IPMI Version : 1.5
Manufacturer ID : 24339
Manufacturer Name : Unknown (0x5F13)
Product ID : 21267 (0x5313)
ipmitool
ipmitool [parameters] mc info
Terminal mode
[18 00 01]: raw 0x06 01
Description
Get device’s id from selected MC.