Reset watchdog timer, Set watchdog timer – ADLINK cPCI-6S10 User Manual
Page 37
Hardware Platform Management
27
cPCI-6S10
In IPMC console, cold reset message will be printed.
Response Data Fields
Reset Watchdog Timer
Response Data Fields
Set Watchdog Timer
<_>: BMR-AVR Firmware (v1.0.2), cPCI edition.
<_>: Pigeon Point Systems (c) Copyright 2004.
<_>: boot_type: 0xA3
<_>: Reset type: COLD, reset cause: Software
<_>: app_status: 0x01
<_>: Operating mode: Normal
1
Completion code
ipmitool
ipmitool [parameters] mc wdt rst
Terminal mode
[18 00 22]: raw 0x06 0x22
Description
This command is used to reset IPMC watchdog timer.
The ipmitool supports this command.
1
Completion code
ipmitool
ipmitool [parameters] raw 0x06 0x24 0x03 0x01 0x00
0x20 0x00 0x01
Terminal mode
[18 00 24 03 01 00 20 00 01]
Description
This command is used to set IPMC watchdog timer.