EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 176)

Using the Power Meter Linearity Verification Tool
164 IQS-12004B
Viewing and Printing Test Results
To view a test report from the Power Meter Linearity Verification
tool:
1. Select the Report function tab.
2. If the desired report is not already displayed, choose Open from the
File panel.
You can use and to browse the document.
You can also adjust the page display using the up/down arrows next to the
page display mode box.
If necessary, the report file can be saved by using the Save button.
To print a test report:
1. If necessary, select the Report function tab.
2. If the desired report is not already displayed, choose Open from the
File panel.
3. Use the Print button to send the report to the default printer. An error
message is displayed if no printer has been installed on the system.
Note: If you want the data report to be automatically printed at the end of the
test, go to the Instrument function tab and select Print from the Report
panel.