EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 223)

Automating or Remotely Controlling the System
DWDM Passive Component Test System 211
MultiPath Testing Option COM Error Messages
MultiPath Testing Option COM Error Messages
Error
Number
Description
ErrDetection Unable to initialize the switch because the
detection has not been performed. Please
perform switch detection.
ErrNoHardware Some required modules are not available or
have not been installed.
ErrMissingDBTemplate The database templates are missing in the
specified path.
ErrMptoNotInstalled Inappropriate version of IQS-DWDMTS. Please
install MultiPath Testing Option to use Switch
interface.
ErrInvalidSwPort An inappropriate switch port value has been
assigned.
ErrEmptyTrace Unable to compute curve because some input
traces are empty.
ErrNumberRefExtTrace An inappropriate number of reference
channels has been assigned (Reference at t=0
is not the same as t=x).
ErrDoAnalysisBefore Unable to proceed with polarization
dependency analysis because the standard
analysis has not been performed. Please
perform standard analysis before.