EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 289)

COM Objects Reference
DWDM Passive Component Test System 277
Measures Interface—Methods
Measures CalOrlMandrelRtj
Description This command performs an ORL calibration using a mandreled
reflection reference jumper (zero measurement).
Syntax object.CalOrlMandrelRtj(FireEvent)
Parameters Byval Boolean FireEvent
Response None
Possible error ErrInitBefore, ErrInProgress, ErrAcqType, ErrAcqStopped,
ErrScanRange, ErrSourceNotEnabled. For more information,
see IQS-12004B DWDM Passive Component Test System
(Standard) COM Error Messages on page 208.
Measures CalOrlRtj
Description This command performs an ORL calibration using a reflection
reference jumper.
Syntax object.CalOrlRtj(FireEvent)
Parameters Byval Boolean FireEvent
Response None
Possible error ErrInitBefore, ErrInProgress, ErrAcqType, ErrAcqStopped,
ErrScanRange, ErrSourceNotEnabled. For more information,
see IQS-12004B DWDM Passive Component Test System
(Standard) COM Error Messages on page 208.