EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 User Manual
Page 210
Automating or Remotely Controlling the System
198
IQS-12004B
SCPI Error Messages
48
Invalid power meter value (over range).
49
The sweep cannot be performed. The laser source is
not turned on.
52
Not available in simulator mode.
53
Number of acquisition points must be between 1 and
32 000.
513
Invalid parameter.
514
Wrong function was called.
515
Invalid number of channels.
516
No module is initialized.
517
Unable to open the log file.
518
Error when closing the log file.
532
System error.
533
GPIB board has to be controller in charge (CIC) to
function properly.
534
No listeners on the GPIB.
535
GPIB board not correctly addressed.
536
Invalid argument when the function is called.
537
GPIB board is not CIC, as required.
538
I/O operation aborted (Time Out).
539
GPIB board not installed.
540
Direct memory access (DMA) error.
542
Asynchronous I/O in progress.
543
Cannot operate.
544
File system error.
Error Number
Description