EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 35)

Getting Started with Your DWDM Passive Component Test System
DWDM Passive Component Test System 23
Installing Hardware Components
Configuration with PDL
Connect the tunable output of the IQS-2600B/IQS-2600CT to the input of the
IQS-5150 using the rigid patchcord supplied with the
IQS-2600B/IQS-2600CT. Connect the output of the IQS-5150 to the input of
the IQS-9401, as illustrated below.
Connect the launch fiber to the output of the IQS-9401.
Note: The IQS-9401 has an angled (APC) output connector.
IQS-2600CT
ACTIVE
OUTPUT
MONITOR
OUTPUT
TRIG IN
TRIG OUT
Tunable Laser Source
IQS-5150
OUT
IN
Polarization State Adjuster
IQS-9401
OUT
IN
Wavelength Reference Module
Sync
Out