EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 349)

COM Objects Reference
DWDM Passive Component Test System 337
Switch Interface—Methods
Simulator: Optional. A Boolean value indicating if the switch
component is initialized in a simulation mode or not. The
default value is False.
The following table presents the possible settings for the
Simulator argument.
Response None
Note An event will be raised once the initialization is complete if the
FireEvent argument has been previously set to True.
This method starts the initialization process of the specified
switch. If the index is invalid or if there is a problem while
communicating with the switch device, an error will be raised
and the switch won’t be correctly initialized.
Setting Description
True Initializes a simulated switch. In this case, the
DetectedIndex argument is not used.
False (Default). Initializes the specified physical
switch. The DetectedIndex argument must be
valid.