EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 72)

Operating the DWDM Passive Component Test System
60 IQS-12004B
Working with Access Levels
It is also possible to directly log on at the Supervisor level when creating a
new test database.
To log on at the Supervisor level:
1. From the Welcome/New Test window, check the Supervisor box.
2. Press the Password button. The Supervisor Level window is
displayed.
3. Type your password and press OK.
You can later change your password in the Options menu. For details, see
Changing Supervisor Password on page 60.
Changing Supervisor Password
To change the password once you are at the Supervisor level:
1. From the main window menu, select Options >
Supervisor Options> Change Password. The following window
appears:
2. Enter the old password and then enter the new password twice.
Note: Passwords must be between six and ten characters long.
3. Click OK to save the new password.
I
MPORTANT
Under Windows 2000, you must have Administrator rights to
modify the supervisor password.