LINK Systems LinkNet II User Manual
Page 22
• Break Time - Time during a shift when operators are on break. Data is collected but under a
break time code. See section 4.7 for details on schedule configuration.
• Off Schedule Time - Time when no shift should be active. For instance, if the plant is shut
down on Sunday, this is off-schedule time. Some, but not all, data is still logged,
but under the off-schedule time code. See section 4.7 for details on schedule
configuration.
• Shift Date
- A shift date can be different from the calendar date. For instance, a shift
could start on Sunday at 10:00PM and end on Monday at 6:00AM. The shift
spans two calendar days. Whatever day of the week this shift is configured on
(see section 4.7 for details on schedule configuration) is the shift date for this
shift.
• OEE
- Overall Equipment Effectiveness. This is a standard measurement use in
some circles to measure how effectively equipment is being used. To boil it
down, this is the percentage of parts produced versus the amount of parts that
could have been produced had everything run perfectly and at best speed.
Manual Version 1.1
10/28/2001
3.4